Sidee loo Qaadaa Caruurta Aran Body Body

01 of 05

Baby Aran Body Suit

U jiifto sariir, oo lagu riixo kursiga baabuurka, oo fadhiya boodboodka, oo ku dhex jira gacmihiisa - mararka qaarkoodna boosaskani ma ahan kuwa ugu fiican masruufka. Laakiin waxaad weli rabtaa in aad eegto wadajirta oo aad ugu faraxsantahay si aad u dhowaato ama markaad haysato dad badan oo adiga kugu habboon, sax ah? Ku dheji qurux yar yar - raaxo, jilicsan, jilicsan iyo mid gaar ah, oo lagu daro wiilasha ama gabdhaha! Waxay si fiican u shaqeyn lahayd sawirrada fasaxyada, ama sidee ku saabsan sida qayb ka mid ah foormaatka aan guriga ku dhicin?

Qalabka s:

• 2 (3, 3, 3, 4, 4) Hirarka KnitPicks Bare Swish DK superwash Merino, ama qiyaastii 492 (615, 676, 738, 861, 984)
• Hal cabbir kabadan oo ah 5 US (3.75 mm) irbado
• Cirbadaha kabaha, kuwa wax lagu tolay, calaamadaha calaamadda
• Maqasyo, qiyaasta cajalad iyo cirbadda yar yar
• 13 5/8 inch (16 mm) mashiinka dhexdhexaadiyaha oo la dhaqi karo

Qiyaasta:

• 6 tolid iyo 9 saf oo dherer ah 1 inch ee Stockinette Stitch
• 3.5 inji oo ka badan 25-wiqiyadood oo ka sameysan kabale / xarig / xargo / kabadh
• 2 injirood oo ka badan 17-tol oo dhejis ah qaabka dheeman + + 2 dushood oo laga duubo dhinac kasta

Cabbir:

Ilmaha cusub (3 Bilood, 6 Bilood, 12 Bilood, 18 Bilood, 24 Bilood)

Cunugga finanka ah: 18 (20, 21, 22, 23, 24) inch

Dhamaan dhererka: 18 (19, 20, 21, 22, 24) inch

Tusaalooyin ku dhejis ah qiyaasta 3 bilood, Eileen Casey.

Sawirada by Rebecca Painter of Journey Journeys Barefoot.

02 of 05

U samee Lugaha

1. Ku xeji 54 (62, 62, 66, 70, 74) oo ku shaqeeya 1 inji 2x2 ribbing sida soo socota - K1, * K2, P2. Ka soo celi * ilaa laadkii ugu danbeeyay, K1 - ku dhameeystiraya safka dhinaca khaladka ah. Kordhi 1 (0, 1) dhajinta dhamaadka kasta ee safka ugu dambeeya. 56 (62, 64, 68, 72, 74) tolmo.
2. Sameey qaababka sidan soo socota: P2 (3, 4, 5, 6, 6), bilawga Root Cable 1 jaantuska 1, P2, bilawga Jaantuska Cabirka Labadaa Moss Diamond ee Row 1, P2, Bilowga Rope Cable 2 shaxda 1, P2 (6, 6, 8, 10, 12), bilawga Root Cable 1 jaantuska 1, P2, bilawga Jaantuska Labada Moss Diamond Cable ee Row 1, P2, Bilawga Rope Cable 2 Jaantuska 1, P2 (3, 4 , 5, 6, 6).
3. Farsamooyinka la shaqeynayo ee la abuuray oo leh Qalabka Reverse Stockinette inta u dhaxaysa motifs, sii wad ilaa ilaa lixda qaybood oo 6 (7, 7.5, 8, 10, 11) inches, adoo ku dhejinaya khadadka dhinaca khaldan. Fiiro gaar ah: Ka dib markaad ka shaqeysid shaxda Double Moss Diamond oo marmar ah, waxaad kuxirtaa safafka 3-20 oo kaliya marka dib loo soo celiyo.
4. Ka sii dixi qurxinta hanti, ka dibna samee lugtii labaad.

03 of 05

Ku biir lugaha iyo jilbaha jirka

Ku biir lugaha:

1. Dhinac dhinaca midig ah, qaado lugta koowaad oo aad ka shaqeyso isku xigta sidatan soo socota: P1, M1 , u shaqeyso naqshad dharka ugu dambeeya, M1, calaamadeeye, P1.
2. Ha noqonin shaqo. Ku tuur 4 tolida adoo isticmaalaya hababka suulka .
3. Lugta labaad ee dhinaca dhinaca midig ah u jeedso kana shaqee sida soo socota adigoo isticmaalaya dhogorta lugta koowaad: P1, calaamadeeye, M1, u shaqee naqshad dharka ugu dambeeya, M1, P1.
4. Lugaha hadda waa lagu soo biiray waxaana jira 120 (132, 136, 144, 152, 156) tolmo.
5. Ka shaqee safka xiga, adoo haya isugeynta dhajinta ee Reverse Stockinette iyo xariiqda 6 xarfaha u dhexeeya calaamadaha Stockinette Stitch halka inta harsan hababka kale ee la aasaasay.

Ka shaqee jirka:

1. Ka bilow dhinaca dhinaca midigta, ka shaqee Jirka Braid Cable bartamaha 6 xariiqda u dhexeeya calaamadaha, laga bilaabo safka 1. Ka dhig qaababka kale ee horay loogu aasaasay lugaha.
2. Ka shaqee qaabka ilaa 14.5 (15, 15.75, 16.5, 17.25, 19) inji, ku dheji khadadka dhinaca qaladka ah.

04 of 05

Ka shaqee Dhexdhexaadinta, Dib u Dhiska iyo Kursiga

Qaybi Armholes iyo Right Front:

1. Shaqada 29 (32, 33, 35, 37, 38), u leexo oo ka shaqee arimahaan marka hore. Tani waa Cadaalad Hor leh. Ku dhaji xayawaanka haray ee haysta.
2. Si toos ah u shaqee ilaa Ilaa Cadaalada Cadaalada 16 (17, 18, 19, 19.5, 21.5) inji oo ka soo baxa geeska, adoo ku dhameeya safka dhinaca khaldan.
3. Isku dheji 5 tolid ah bilowga safka dambe, ka dibna 3 (3, 3, 4, 4, 4) tolida bilowga 2aad ee xiga dhinaca midig. 18 (21, 22, 22, 24, 25) dharka.
4. Sii wad nidaamka (sida ugu macquulsan - marka ay jiraan wax tolmo ah oo aad u yar oo ah samaynta mooska marsadaha double-ka, kaliya xaji xuduudaha Stockinette iyo gudaha gudaha Moss Made). Marka armaajada ay qiyaasto 3.5 (4, 4.25, 4.5, 4.75, 5) injir, ka tago tolidda hanti.

Dib u shaqee:

1. Ku dhaji dhogorta dhinaca midig ee u jeedka iyo ka shaqee 62 (68, 70, 74, 78, 80). Tani waa Back. Ka tag 30 (32, 33, 35, 37, 38) oo ku yaal dharka.
2. Si toos ah u shaqee xayndaabyada dambe, adoo haysanaya dhammaan qaababka aasaasiga ah, illaa qoryaha cabbiraya 3.5 (4, 4.25, 4.5, 4.75, 5)
3. Ka sii dix muraayadaha adoo haysta.

Ka shaqee dhinaca bidix:

1. Ku dhaji saabuun dhinaca midig ah kana shaqee dhammaan 29 (32, 33, 35, 37, 38) tolmo.
2. Si toos ah u shaqee ilaa tallaabooyinka hore ee bidixda 16 (17, 18, 19, 19.5, 21.5) inji ka hooseeya furitaanka lugta, oo soo afjaraya safka dhinaca midig.
3. Isku dheji 5 tolid ah bilowga safka dambe, ka dibna 3 (3, 3, 4, 4, 4) tolida bilowga 2aad ee xiga dhinaca midig. 18 (21, 22, 22, 24, 25) dharka.
4. Sii wad nidaamka (sida ugu macquulsan - marka ay jiraan wax tolmo ah oo aad u yar oo ah samaynta mooska marsadaha double-ka, kaliya xaji xuduudaha Stockinette iyo gudaha gudaha Moss Made). Marka armaajada ay qiyaasto 3.5 (4, 4.25, 4.5, 4.75, 5) injirta iyo iskuduubka Cadaaladda iyo Cadaaladda, waxay ka tagaan tolidda hanti.

U diyaarso Sleeves (Samee 2):

1. Kala duug 30 (34, 38, 38, 42, 42) dhajinta iyo shaqeyn 2 inch oo ku jirta rikoodhada 2x2. Kordhi 1 halbeeg dhamaadka safka ugu dambeeya. Waxaa jira 31 (35, 39, 39, 43, 43) tolmo.
2. Samee qaabab sidan soo socota: P3 (5, 7, 7, 9, 9), bilaabista khariidadda Rope Cable 1 ee Row 1, P2, bilawga Shaxda Cabirka Labada Moss Diamond ee Row 1, P2, Bilowga Rope Cable 2 shaxda 1, P3 (5, 7, 7, 9, 9).
3. Shaqada 1 saf oo dheeraad ah, oo ku dhamaata dhinaca qaldan.
4. Sii wadista qaababka sida loo aasaasay, kordhin 1 halbeeg kasta dhamaad kasta oo ku xigta iyo mid kasta oo ka dambeeya afaraad ilaa laga gaaro 47 (53, 57, 59, 63, 65) tolmo.
5. Si toos ah u shaqee oo aan sii dheereyn ilaa ilaa inta la gelinayo qiyaasaha 5.5 (6, 6.5, 7.5, 8, 8.5) injir.
6. Xakamee dhammaan wasaqda.

05 05

Dhammaad

Ku dhaji suubinta:

1. Isku laab 2 Qodobbada Guud ee Dhabarka ah ee dhinaca Qalabka ka soo horjeeda. Ku dheji xayawaanka nool ee cirbadaha.
2. Shaqada 3-cirbad ayaa xirxiraya garbaha dushooda si ay ugu biiraan seeraha.
3. U shaqee dhinaca midig ee shaqada. Ku xir suunka armhalladaha.
4. Dhejisyada kabaha shubka.

Button Bands (Gabdhaha):

Xaqa:

1. Dhinac dhinaca midig ah, soo qaado oo soo jiid garabka 108 (116, 116, 124, 132, 140) adoo koraya geeska Right Front, ka bilaabaya lugta lugta oo ku dhamaato qoorta.
2. Ka shaqee 2x2 feedhka nus nus, oo ku dhamaata safka dhinaca khaladka ah.
3. Buttonholes: Rib 4, yo , K / P2tog (kuna xiran qayb ka mid ah feeraha), feeraha 11 (12, 12, 13, 14, 15), yo, K / P2tog, fare 11 (12, 12, 13, 14, 15 ), Yo, K / P2tog, fare 11 (12, 12, 13, 14, 15), yo, K / P2tog, feeraha si loo dhammeeyo. Waxaad samaysay 4 buttonholes.
4. Sii wad 2x2 feer ilaa qalabka lagu qiyaaso 1 inji.
5. Iska ilaali dhammaan wasaqda feedhka.

Bidix:

1. Dhinac dhinaca midig ah, soo qaado oo ku calaamadee 108 (116, 116, 124, 132, 140) adoo dhajinaya geeska bidixda, oo ka bilaabaya qoorta ciribta iyo ku dhejinta lugta.
2. Ka shaqee 2x2 feedhka nus nus, oo ku dhamaata safka dhinaca khaladka ah.
3. Buttonholes: * Fare 11 (12, 12, 13, 14, 15), yo, K / P2tog (kuna xiran qayb ka mid ah feeraha). Ku soo celi ilaa * ilaa ay jiraan 4 tolmo, bidix 4. Waxaad samaysay 8 buttonholes.
4. Sii wad 2x2 feer ilaa qalabka lagu qiyaaso 1 inji.
5. Iska ilaali dhammaan wasaqda feedhka.

Gudaha lugta:

1. Dhinac dhinaca midig ah, soo qaado oo ku calaamadee 96 (104, 108, 112, 116, 120) adoo dhajinaya dhinaca midigta, ka bilaabaya lugta, ka hor lugta lugta, oo hoos u socda dhinaca bidixda lugta ku tuur.
2. Ka shaqee 2x2 riix ilaa 1 inch, adoo ku dhajinaya khadadka dhinaca khaldan.
3. Iska ilaali dhammaan wasaqda feedhka.

Calaamadaynta:

1. Dhinaca midig wajahaya, soo qaado oo ku calaamadee 72 (76, 76, 80, 84, 88) tolmo qoynta ah oo ku yaal qaybta "Right Front button", "Right Front, Back, Front Loop," iyo "Left Front button".
2. Ka shaqee 2x2 feeder ah 1 saf.
3. Ka shaqee 2x2 feerka illaa 5 tolid ah, K / P2tog, yo, feeraha 3.
4. Ka shaqee 2x2 riix saddex-meelood oo hal wareeg ah, adoo ku dhajinaya khadadka dhinaca khaldan.
5. Iska ilaali dhammaan wasaqda feedhka.

Button Bands (Wiilasha):

Xaqa:

1. Iyada oo ay la socoto RS-ga, soo qaado oo u jajabiso 108 (116, 116, 124, 132, 140) waxay kor u qaadaan geeska Right Front, iyagoo ka bilaabaya lugta lugta iyo dhammaada qoorta.
2. Ka shaqee 2x2 feedhka nus nus, oo ku dhamaata safka dhinaca khaladka ah.
3. Buttonholes: * Fare 11 (12, 12, 13, 14, 15), yo, K / P2tog (kuna xiran qayb ka mid ah feeraha). Ku soo celi ilaa * ilaa ay jiraan 4 tolmo, bidix 4. Waxaad samaysay 8 buttonholes.
4. Sii wad 2x2 feer ilaa qalabka lagu qiyaaso 1 inji.
5. Iska ilaali dhammaan wasaqda feedhka.

Bidix:

1. Dhinac dhinaca midig ah, soo qaado oo ku calaamadee 108 (116, 116, 124, 132, 140) adoo dhajinaya geeska bidixda, oo ka bilaabaya qoorta ciribta iyo ku dhejinta lugta.
2. Ka shaqee 2x2 feedhka nus nus, oo ku dhamaata safka dhinaca khaladka ah.
3. Buttonholes: Rib 63 (68, 68, 73, 78, 83), K / P2tog (iyadoo ku xiran qeyb ka mid ah feeraha), yo, riix 11 (12, 12, 13, 14, 15), K / P2tog, 11 (12, 12, 13, 14, 15), K / P2tog, yo, riix 11 (12, 12, 13, 14, 15), K / P2tog, yo, feerka si loo dhammeeyo. Waxaad samaysay 4 buttonholes.
4. Sii wad 2x2 feer ilaa qalabka lagu qiyaaso 1 inji.
5. Iska ilaali dhammaan wasaqda feedhka.

Gudaha lugta:

1. Dhinac dhinaca midig ah, soo qaado oo ku calaamadee 96 (104, 108, 112, 116, 120) adoo dhajinaya dhinaca midigta, ka bilaabaya lugta, ka hor lugta lugta, oo hoos u socda dhinaca bidixda lugta ku tuur.
2. Ka shaqee 2x2 riix ilaa 1 inch, adoo ku dhajinaya khadadka dhinaca khaldan.
3. Iska ilaali dhammaan wasaqda feedhka.

Calaamadaynta:

1. Dhinaca midig wajahaya, soo qaado oo ku calaamadee 72 (76, 76, 80, 84, 88) tolmo qoynta ah oo ku yaal qaybta "Right Front button", "Right Front, Back, Front Loop," iyo "Left Front button".
2. Ka shaqee 2x2 feeder ah 1 saf.
3. Fare 3, Yo, K / P2tog, ku shaqeyn 2x2 feeraha si aad u dhamayso.
4. Ka shaqee 2x2 riix saddex-meelood oo hal wareeg ah, adoo ku dhajinaya khadadka dhinaca khaldan.
5. Iska ilaali dhammaan wasaqda feedhka.

Dhammaadka:

Ku lifaaq badhanka ka soo horjeeda isugeyntooda. U diyaarso dhererka iyo isku-dhejinta cabiraadda qaab-dhismeedka.